Freeleech Torrent + Direct Missler Software Topsolid 2018.v6.19.200.x64

[artree]

Thank you verry much, some inf about 6.20?

 

[Azamo1]

Thanks

 

[w4tchn0w]

Installation amped.txt is very confuse ( spaces, dot, informations not clear )... i'm stuck after installation, what do i need to do ? i rename top.code in "mymachinename.cod", i copy lserv.lic in the correct folder, now in wlmAdmin when i click on subnet i have this message -> the system cannot retrieve the servers, there is no response to the broadcast

i'm lost, my brain took vacations ^^

 

[striker13]

I have the same problem.
I follow all steps, I had the license on subnet server on wlmadmin
but at the end topsolid is in demonstration mode.
Could you help me .

Thank you

 

[Steph63]

hi, thank you, i looked for topsolid in a recent version to try it for months !
Thx

 

[alaadin]

Thank you very much

 

[allumi]

Installation amped.txt is very confuse ( spaces, dot, informations not clear )... i'm stuck after installation, what do i need to do ? i rename top.code in "mymachinename.cod", i copy lserv.lic in the correct folder, now in wlmAdmin when i click on subnet i have this message -> the system cannot retrieve the servers, there is no response to the broadcast

i'm lost, my brain took vacations ^^

I copied lserv.lic also in " C:\Program Files (x86)\Common Files\SafeNet Sentinel\Sentinel RMS License Manager\WinNT" and i removed the exyension .lic, after this all work properly.

 

[mussaka]

Hi, I have installed topsolid a few times know so I can say that I know the procedure.
Do in the following order :

1 - Change your computer name with a simple name in capital like "MORKELEB", no number, symbol, and space.

2 - Instal topsolid as say in the amped.txt.

At Which type of installation screen, choose "Floating license"
at next screen choose "Client AND License Server"
at next screen at Server field give your computer name.

3 -

when the instal is done, copy "lservrc.lic" to installed folder "missler\v619\bin"

You will find lservrc.lic in the AMPED folder.

4 -

open top.cod with Notepad and replace "YourComputerNameHere" with the computer name you gave earlier and paste it to \Missler\Config.

You will find top.cod in the AMPED folder.

5 - In the DVD files, you will find the tools you need for the next step. "Redist\Sentinel RMS License Manager".

6 - This step is not mandatory
- Copy the "Tools" folder to "C:\Program Files (x86)\Common Files\SafeNetSentinel\Sentinel RMS License Manager".

7 - Run WlmAdmin.exe
- left clic on subnet server then right clic on the chosen ip and "Add feature/from a file/to server an file/lservrc.lic.".

8 - Close WlmAdmin and restart your computer because why not ;p

9 - Now topsolid should work, I don't know why, but you have to be connected to internet for topsolid to work. Well it is the case for me every time.

10 - About the update, I have update te program without problems, but you have to know that there will be no more update.

I hope this will help all of you.

about the 4th step, here is an exemple

MORKELEB:Missler/255/6.19
MORKELEB:Missler/255/6.22

 

[cellncare]

1 . Change Computer Name To PC or Something Without Space Or Numbers
2 . Install Set Up As Per Your Requirement
Restart If Asks Without fail
Note:Do Not Open Topsolid Application
3 . After Installation Update Software No Need To Worry
Update App in ProgramFiles/Missler Software/TopsolidUpdate/Bin/Topsolid Update
Now Disable Auto Update On StartUp
4 . Important ....Careful Steps After Update
5 . Block From Firewall App (Better Block Both In / Out) ..Lies In ProgramFiles/Missler Software/TopsolidUpdate/Bin/Topsolid Update (APP)
6 . Now Go to Environment Variable.. New/ Variable Name LSHOST Value (Computer Name) Save.. Again New Varible Name LSFORCEHOST Value (Computer Name) Save..
7 . Go to DVD Copy Tools Folder From Redist / Sentinel RMS Licence Manager TO C: Drive
8 . Now Copy ... top.cod And lservc.lic to C:/ Missler/Config Folder And Overwrite
9 . Open top.cod... Replace Your Computer name.. in place of YourComputerNameHere:Missler/255/6.19
Example PC:Missler/255/6.19
PC:Missler/255/6.22
10 . Now Open Tools WlmAdmin Click Subnet Server Your PC Name Should be shown .. Now right click and AddFeature From a File To Server and its File
Navigate to C: lservc.lic ......... Its Done
11 . Restart Without Fail Now Open Software And Enjoy !
If Again license Error As i Have Tried need to Reinstall OS and Topsolid Then only It Works

In My Case i dont need internet Can also work offline

 

[cicinho994]

Successful installation
has how to make Progress features for forming siulation work?
Tks!

 

[Raquel1969]

When I run WlmAdmin it always appears in subnet servers 169.254.154.119 instead of the computer name which is in capital letters without numbers or spaces. Can you help me ???
I have already installed it several times and I never carry it what I need the name of my pc
Thanks

 

[LUXMOND]

Hello,
I'm trying to download TOPSOLID, but no links are working.... Can You help me please.
Thanks.

 

[mussaka]

Hi Luxmond, torrent should work, I am seeding

 

[LUXMOND]

Hi Luxmond, torrent should work, I am seeding

OK Thanks a lot.
Did you try it on WIN 10 and Win 7 ?

 

[mussaka]

I use Win10 but I know it works on both

I just cheked my seedbox and it was empty... I reloaded the files and torrent but it goes up to 99.9%...
leave a message if you can't dowload it. I can make a new torrent if need be.

 

[LUXMOND]

Hi Mussaka,
Thank you for your help !!
I find the ISO directly on the ftp Missler but after the installation, it doesn't work.
I've got an error, always..."Erreur lors du calcul de placement" : French version
I don't understand what it means...

 

[mussaka]

I have never had this message.

Have you closely follow these steps ?

You mount the ISO in virtual clone drive for example, then open the Topsolid launcher (setup.exe)
in the Topsolid launcher you choose the language then select "Topsolid x64"

after, you are asked what kind of installation do you want :
Choose "Floating license" or "Licence flottante" in french
at next screen choose "Client AND License Server"... I don't remember what is written in french, but I believe it is the third choice.

the following steps are detailed up there in the comments.

If you have done this correctly, I don't know what went wrong for you, I am sorry.

 

[LUXMOND]

Hi,

I found and solve this problem : "erreur de calcul...."
I found the solution on the Official Topsolid Forum (in French) .
Problem with an older version of VISUAL ++.
Now it's almost OK, new problem about license.... Only demo mode.
I do all you're written above, same order but : Find no license...6.22
Can you send me "your" top.cd and license lservrc.lic.
I don't understand
6.22 that's for 2018 or 2021 version ??

Thanks

 

[LUXMOND]

IT WORKS !!!!
After 2 uninstall and a good clean.
Thanks, now I can do some drawings !!

 

[ben_2666]

Win 10 PRO: build 19044
I have tried a lot but I really need your support please.
-Does this Medicines support "wood package" licence? if yes next question
-During installation when you have to choose some driver: Netframework; C++ library, licence driver . Can you confirm to select nothing? I guess it is the best. After I restarted.
I have no question dealing with the files TOP.cod lservrc.lic or floating licence (it is clear to me)
-Is it normal to have 2 xIP adress on WlmAdmin.exe? (I tried many times it seems it is only needed to change on 1st IP address, the second change also)
here is the message I got end of procedure:
Number of license() read = 4
Number of licence(s) successfully installed = 4

When i run for 1st time TopSolid, I got message: "
"no licence of this type found on licence server: Missler/255/6.19"

my last try:
name PC: SALLE
installation nothing selected (only wood package) (ok for licence floating+name on server "area")
RESTART
do stuff with top.cod (notepad++) & lserrc.lic
start wladmin.exe
"add feature" only on 1st IP adress (nota: the 2x IP adress show the PC name on top of windows "server information"
RESTART
I click on xx.exe, it fails to find a licence, start on demo mode

ps : every time I retry I use revo uninstaller to do a clean unsintall

Any idea?what do I do wrong ?