Torrent Windows Pure 10 Pro (x64) -=TeamOS=-

[CzechShark]

It might not hurt for someone to start a different topic about this perhaps in the help section. This is not a build specific issue, I have this happen to me on certain builds and have been trying to narrow it down but seems to be very random. I have some that will install on one machine fine and not on another...... Typically just a hard reboot of your pc will restart the installation and most of the time continue. I'm pretty certain now that its a combination of specific hardware and specific builds that just have this issue, but what that is I have no idea.

 

[chaplin21]

@Mirkec and everyone, after wmare I am trying in a limitated machine, the famous "Just wait a moment" i restarted the machine, restart again but it take longer... right now like 15 minuts... and still reading...

 

[Mirkec]

It might not hurt for someone to start a different topic about this perhaps in the help section. This is not a build specific issue, I have this happen to me on certain builds and have been trying to narrow it down but seems to be very random. I have some that will install on one machine fine and not on another...... Typically just a hard reboot of your pc will restart the installation and most of the time continue. I'm pretty certain now that its a combination of specific hardware and specific builds that just have this issue, but what that is I have no idea.

Finally one smart thought. As I already said, in my first reply, to the initiator of this lynch....
Thanks

 

[Addymore]

@Mirkec found a solution about the installation on my installation...! My settings in Rufus was GTP and NSFP then I was always stuck on "Just a moment" . Finally when I was stucking there...I changed BIOS by changing Legacy value....Disable to Enable or vice versa! And it booted....! Now installation seems ok....

 

[Persona436]

NO No.....
Finally i Found the Solution after 3 Days of Struggle...
Set Rufus Settings to MBR, Bios or UEFI by using Alt +E , NTFS....
Proceed the Setup...
At JUST a Moment give it round about 30min... After that Remove ur Bootable USB, Restart Your PC or laptop, just a moment it will wipe in just few Min Thanks... Its 100% accurate Method For This ISO.... It works. hit like if it works for you as well

 

[Addymore]

NO No.....
Finally i Found the Solution after 3 Days of Struggle...
Set Rufus Settings to MBR, Bios or UEFI by using Alt +E , NTFS....
Proceed the Setup...
At JUST a Moment give it round about 30min... After that Remove ur Bootable USB, Restart Your PC or laptop, just a moment it will wipe in just few Min Thanks... Its 100% accurate Method For This ISO.... It works. hit like if it works for you as well

Meaning ur installation is using MBR?

 

[Persona436]

Meaning ur installation is using MBR?

Yup For Legacy/BIOS Go For MBR, For UEFI Go For GPT

 

[blessed]

Just remembered you can't pm on only a registered account.

So GSearch "fh3 redownloading fix pc" for the method I used. It's a Reddit post.

Oops, sorry, this is an accidental post.

 

[emonkmcl]

I cant download the torrent file, because my ratio is too low.
plz upload direct link

 

[Nviryz]

Does this build have issue with the audio in some certain games?

 

[mauriceps]

@Mirkec Thanks for ur excelent work!

I also had the instalation stuck at "just a moment" but after 3 hard reset, the instalation process continue without any problem. Now the system is stable but using 1.2gb of ram. Is that normal? i checked your printscreens and acording to one of them it should be using aroung 600mb of ram.

Ty!

 

[Mirkec]

@Mirkec Thanks for ur excelent work!

I also had the instalation stuck at "just a moment" but after 3 hard reset, the instalation process continue without any problem. Now the system is stable but using 1.2gb of ram. Is that normal? i checked your printscreens and acording to one of them it should be using aroung 600mb of ram.

Ty!

It depends on how many RAM you set in VM settings. For testing purposes, I always use in VM 2 GB max!
For PRO version that is excellent install the original Windows and compares! Same as LTSC/LTSB...

 

[The_Unforgiven]

Cooee all
I went into BIOS so the USB drive is the first boot and it went through the install once in 5 minutes on an SSD
It the re-booted & it wanted to install again
So I took out the USB drive, that is when I get the "just a moment"
I then made it re-boot & where it goes to install
I did the "repair" option, no luck there either
Then I had a moment (I hate being sober)
I did the 'what if'
What if the USB is the boot drive so it installs first and when it re-boots
go into BIOS & make the SSD or HDD the first boot drive
and you could have pushed me over with a feather (I am 120kg)
Windows had the HDD light showing activity & the rest of the install went grouse

TL;DR - first run boot from the USB drive, then when it re-boots go into BIOS & make the SSD or HDD the start up drive

Also for the 'rufus' thing - in Partition scheme use 'MBR' & next to it in Target system use 'BIOS'

I hope this helps everyone have troubles - it was just the boot order in the BIOS

 

[berryRaspberry]

hi sir. is this safe to be used as a driver for a laptop that will be used in the office too?

 

[pierre010170]

Hi All,

I confirm it's just a pb of boot order

see last post :
"I hope this helps everyone have troubles - it was just the boot order in the BIOS"

When Windows reboot for the last time after the installation, you have to force the reboot order to the "windows boot manager" and not to the drive where windows is installing. Then you will pass the "just a moment" screen.

 

[myviewsontech]

This is a very good build. I am downloading now and will seed to keep may ratio good! - I like the choice of customizations especially removing all windows defender dependencies. and how efficient it is on resources - I will test drive it with my recording gear , wifi , proxmox, vmware, parallels. Great job sofa.

I would like the same build using the 19H2 build if possible.

 

[The_Unforgiven]

Hi All,
I confirm it's just a pb of boot order
see last post :
"I hope this helps everyone have troubles - it was just the boot order in the BIOS"
When Windows reboot for the last time after the installation, you have to force the reboot order to the "windows boot manager" and not to the drive where windows is installing. Then you will pass the "just a moment" screen.

cool find I did eh
your welcome

 

[Nviryz]

Just installed yesterday and run smoothly no errors what so ever during installation. This is by far my favorite os. Thank you so much

 

[SoberD]

Thank You Looks Sweet!

 

[utorb]

the best site