Torrent Harmonics Windows 7 Ultimate Multi & Slim [August 2021]

[SlavkoPejic]

Thanks jerry_Xristos for share new update

 

[gregorio]

ty so much for this!

 

[crisecured]

I tried ventoy same issue it's not limited to this jerry version but every version of windows 7 I tried on i5 10th gen it never boots

Here is what I tried

Secure boot disabled
Rufus gpt uefi non csm does not boot


Rufus mbr bios or csm does not even show my pendrive as any boot device in bios

in other words maybe your motherboard and processor cannot support windows 7.

 

[Chuck]

in other words maybe your motherboard and processor cannot support windows 7.

Perhaps you are right. I seem to recall reading that some i5 generations are not compatible with Windows 7.
Do some research about that.

 

[Jerry_Xristos]

Perhaps you are right. I seem to recall reading that some i5 generations are not compatible with Windows 7.
Do some research about that.

microsoft changes things all the time, now its forcing all of us with her way to go for windows 11

 

[Jerry_Xristos]

Was waiting for your windows 7 lite or slim version....finally arrived thank for this great build...will VPN services Work on this build?
Wonderful share as the screens are

@

You must be registered for see links

, Sorry for the delay my friend but I wasn't at home to check

You must be registered for see links

So far its working fine

 

[lordofheaven]

@Jerry_Xristos ,he likes his job that's good

 

[kim uchiha]

Two words for this build.

Solid and Well done.


Thanks for this build @

You must be registered for see links

 

[Riddlex2018]

i need 32 bits ☹️

 

[reza bm54]

Thank you. Will it be updated? There is no problem with backing up؟

 

[Jerry_Xristos]

Thank you. Will it be updated? There is no problem with backing up؟

Back up is gone as you can see at description
I haven't touch anything in windows update section but as you know microsoft has stopped the updates

 

[Riddlex2018]

#Jerry Can you upload it in 32 bits with the Spanish language?

 

[reza bm54]

errors cod 0x8007025d no install

 

[Jerry_Xristos]

errors cod 0x8007025d no install

Use ventoy or power iso to make a bootable usb and not rufus and try again

 

[reza bm54]

Use ventoy or power iso to make a bootable usb and not rufus and try again

power iso and rufus Tested but not installed

 

[Jerry_Xristos]

power iso and rufus Tested but not installed

What is Error 0x8007025D?​

According to windows support, 0x8007025D = ERROR_BAD_COMPRESSION_BUFFER = the specified buffer contains ill-formed data. USB 3.0 uses the Message Signaled Interrupt (MSI) mode for communications with the system. USB 2.0 uses the much older Interrupt Request (IRQ) system. One feature of the new MSI system that USB 3.0 devices use is asynchronous handling of data transfer between the device and system. This requires a buffer through which data is streamed to at high data rates (“SuperSpeed”), which is then decoded by the system. If you receive error 0x8007025D then probably your PNY devices are sending bad or corrupted data to the buffers, your device’s buffers are choked or your device can’t decode the data properly. Here are the reasons why you might be receiving this error.

Corrupt data on the USB drive means that this data cannot be decoded properly thus throwing this error. Corrupt data may be from the corrupt .ISO image file used to create the bootable USB drive. If the file that should be copied is missing or corrupt, you will get this error. The issue might also arise from a bad flash drive that is corrupt of unreadable at a certain section. In the case where you might have plugged in another USB device that is read as another disk drive, the data sent to the buffer by this devices might cause the error.

Bad HDD or SSD space​

If the HDD or SSD has a bad sector or record and the Windows installation tries to copy files to this space, an error is returned to the buffer, which in turn displays error 0x8007025D. This can be caused by prolonged use of a disk space (e.g. to play computer games) or storage space that needs to be checked or formatted. A failing HDD can also be the issue causing you error 0x8007025D.

Corrupt or bad RAM​

A bad RAM is also likely to be a cause to this error. Since a clean install does not fight for space with other programs, it means that the whole RAM can be dedicated to installing windows 10 so even a tiny corrupt or bad section of the RAM can cause this issue. Windows 10 needs at least 1GB of RAM to install. If data is copied to a bad section of the RAM, then the buffer technology will receive an error therefore displaying error 0x8007025D on your screen.

Solutions to Fix Error 0x8007025D​

Method 1: Unplug all other external devices​

Unplug all your USB devices and other peripheral devices including the internet cable. Most of the times the Windows installation will throw an error because of bad hardware drivers or outdated drivers.

It also turns out that after copying the files to your computer, windows installation might not need your USB drive anymore. Just unplug your drive and see if the installation will continue from where it left off.

Method 2: Reduce the size of HDD or SSD disk space and format it​

You only need around 20GB of space to install windows 10. We will recommend reducing your installation partition to around 125GB. This will reduces the chances that the space you are copying to is corrupted. You can reduce the disk space by clicking on the “extend” option after choosing to custom install windows 10. Make sure, however, that your hard drive is healthy and not damaged in any way.
If you are doing a clean install, make sure that you format the partition you are installing into. This will iron out the bad sectors and records. To format your partition, choose to install a customized Windows 10, click on the “format” button and accept to format.

Method 3: Try writing the image onto another USB drive​

In the event that your USB drive is corrupt or has an unreadable section, then the buffer technology will detect this error and throw the 0x8007025D error on your screen.

You will therefore need another USB drive for this method. Create the installation files into the new drive and retry the installation. Creating the installation drive from another computer might help resolve the issue.

If you were using USB 3.0 earlier, you could try using a USB 2.0 port since it uses a different technology from USB 3.0 to read the data.

 

[Riddlex2018]

I with this install the window:

You must be registered for see links

✅

 

[RedDove]

You slayed this, that is
gorgeous. thank you so much
for sharing this, jerry_Xristos.

Can I just write, jerry from now on.
I don't want to be disrespectful in any way

 

[Jerry_Xristos]

I with this install the window:

You must be registered for see links

✅

Can you be more specific because I can't understand what you are after

 

[Riddlex2018]

Can you be more specific because I can't understand what you are after

With this program, I start the window normally, in case someone can't start, you can use this program.

excuse my bad English!.