Locked Installing windows 10

[Kurokawa Kai]

Can someone help me thanks a lot, I have problem booting the Windows 10 USB Bootable, It won't continue because it's stuck on orange screen with white stripes
thanks in advance

 

[Mr. Spacely]

Can someone help me thanks a lot, I have problem booting the Windows 10 USB Bootable, It won't continue because it's stuck on orange screen with white stripes
thanks in advance

Try to reburn iso using Rufus also make sure you select BIOS or UEFI

 

[Kurokawa Kai]

Try to reburn iso using Rufus also make sure you select BIOS or UEFI

i already did sir, the partition style of my HDD = MBR, so in rufus I selected the MBR partition scheme , target system = BIOS (or UEFI system)

 

[Mr. Spacely]

i already did sir, the partition style of my HDD = MBR, so in rufus I selected the MBR partition scheme , target system = BIOS (or UEFI system)

Hmmm.. try whit other USB drive if that won't help then I don't know

 

[Kurokawa Kai]

Hmmm.. try whit other USB drive if that won't help then I don't know

ok sir, ill try, but first, in rufus do in advance option do i have to check the "Use Rufus MBR with BIOS ID" ?

 

[Mr. Spacely]

ok sir, ill try, but first, in rufus do in advance option do i have to check the "Use Rufus MBR with BIOS ID" ?

You can try, I'm using it as it is, so I realy can't be of much help.

 

[Kurokawa Kai]

You can try, I'm using it as it is, so I realy can't be of much help.

Thanks a lot sir, I'll try it now, I'll feedback after...

Still the same error sir, I even changed USB drive :'(

 

[Mr. Spacely]

Still the same error sir, I even changed USB drive :'(

Then I don't know try to pull CMOS battery out leave it for 10-15 min and try again

 

[Kurokawa Kai]

Then I don't know try to pull CMOS battery out leave it for 10-15 min and try again

Ill try it sir, and sir, do i have to remove my video card sir ? before installing ?

 

[SiteWizard]

@Kurokawa Kai man stop asking questions .... "removing the video card " how you will see wat is comming on the screen then ...
1: abouth wat windows version are you talking .
2: wat are your computer / laptop specs ...
3: how old is that thing you use.
4: have you try to install it on another laptop ... (to see if it is working )

 

[Kurokawa Kai]

@Kurokawa Kai man stop asking questions .... "removing the video card " how you will see wat is comming on the screen then ...
1: abouth wat windows version are you talking .
2: wat are your computer / laptop specs ...
3: how old is that thing you use.
4: have you try to install it on another laptop ... (to see if it is working )

im planning of removing the video card then moving the VGA cable to the motherboard ( it has VGA Slot )

1. im trying to install the "en_windows_10_pro_19h1_version_1903_18362_356_updated_sept__2019_x64_dvd" by Sir @TheRain
2.i have, i3-2120 @3.30GHz, 4gb ram ddr3, nvidia gts250
3.its pretty old, im using it for 2 -3 years
4.i tried it on my laptop and its working.

bear with me sir im still learning.

 

[SiteWizard]

@Kurokawa Kai wel when it is working on your laptop then it is fine
then i would say it is a hardware or setting problem problem.
1) look in the BIOS screen if it is set to MBR , and the HD is NTFS
if it is like that then it should work ... otherwise you need to buy a new usb stick and start all over on that new stick.

 

[Uncle Mac]

Can someone help me thanks a lot, I have problem booting the Windows 10 USB Bootable, It won't continue because it's stuck on orange screen with white stripes
thanks in advance

From what I read, Microsoft calls this the "Orange Screen of Death". This is usually caused by an overloaded GPU. So I would suspect maybe a faulty graphics card.
Removing the card and using on board video is a good start to diagnose it.
One question though, is your nvidia gts250 overclocked? Because that can cause issues too.

Note: this thread will be closed soon, as it's gone on far enough.

 

[Mr. Spacely]

In that case you choud chec is there any thermal paste on your GC's CPu

 

[Kurokawa Kai]

From what I read, Microsoft calls this the "Orange Screen of Death". This is usually caused by an overloaded GPU. So I would suspect maybe a faulty graphics card.
Removing the card and using on board video is a good start to diagnose it.
One question though, is your nvidia gts250 overclocked? Because that can cause issues too.

Note: this thread will be closed soon, as it's gone on far enough.

its not overclocked sir, i just installed it yesterday, tomorrow ill try to use the board video and try if its gonna work.. if its not ill take it as an experience, thanks for you help sir

 

[Mr. Spacely]

Thread completed. As @Dark Wolf said, sounds like hardware issue. If you just installed yesterday, make sure installed correctly, or not faulty to begin with.