DemonQueen
Member
- Downloaded
- 28.1 GB
- Uploaded
- 77.1 GB
- Ratio
- 2.74
- Seedbonus
- 554
- Upload Count
- 0 (0)
Member for 5 years
Hello there. I am posting this as a last resort, for the past 3 days I have been searching on google, and on team-os, basically everywhere for solutions but I am still not able to make my computer work. I am typing this message from the browser that was included in a Gandalf PE think i downloaded and made bootable usb from (I have no clue how to start with Gandalf, I have tried some small things like trying to fix the ssd and hdd in my pc, to no avail.)
Let me start at the beginning; I installed a new Windows 10, compact from Nicky (Please note that I don't for a second think there was a problem with the OS, as I have downloaded and installed Windows from team-os before and never ever had a problem) Now when the Windows was finished with the download, I made a bootable USB with Rufus 3.11 - the specs was as follows: *Device: 8GB Sandisk Cruiser Blade USB stick *Boot Selection: Disk or ISO image * Image Option: Standard Windows Installation *Partition Scheme: GPT *Target System: UEFI (non CSM) *Format Options: File System: FAT-32.
Thereafter I intitialized the usb via the standard way of using the settings->recovery->restart->use device. System booted up and then a black EFI Shell screen came up, I did nothing inside this window, but after about a minute I rebooted via the button on my desktop (it never happened before so I had a fright) then the setup loaded and I selected my SSD drive as normal like i have always done. Setup finished and windows installed but I notices that my HDD was not there anymore (first time this happened) I tried to reinstall again but then the Recovery option dissappeared, it still installed but not correctly as there were options unavailable like to create recovery drive through the control panel was missing etc. I then used google to try fix the HDD and succeeded - I think i used the disk management utility that windows had. My HDD was showing again. Because the windows was making the errors I mentioned I then downloaded another Windows to try do a new install. I don't know if the settings were wrong on the usb I made again, but it did not work to install on my SSD - I selected format in the install window where you choose the disk to use, but then I got the error code of 0xE0000100 and after I searched for a fix I then tried to fix it with the command utility and diskpart.
It didnt work, and I rebooted the pc but got blue screens of death, with the given options esc for UEFI, F1 for recovery, F8 for startup settings, but only the Esc worked and because I do not have a monitor (I use a tv with standard resolutions 800x600 since my monitor broke and I can't afford another) I have very limited visibility in the UEFI, so did not mess around except for changing the boot select. To use usb. the error codes were : 0xC0000001, 0xC0000225, 0xC0000098, 0xC0000ba which after I searched i realised were boot errors. Boot manager problems but I don't know how to fix even though i have tried everything. I did what I could but I am still unable to get installation to work, if it does initiate then i get the install codes 0xC0000005 Verify installation source problem so I cant install windows.
I figured out that I can use recovery environment - I downloaded Gandalf PE but I think i should have gotten the Sergei one instead, created bootable usb and that is how i am writing now. I don't know where to even start to repair the disks or load drivers needed for windows installation success, please can anyone help me, I use the pc for work and it is my only form of income now because my husband can't yet return to his work due to my country still being in lockdown. Please if anyone can help me fix this I beg you.
Let me start at the beginning; I installed a new Windows 10, compact from Nicky (Please note that I don't for a second think there was a problem with the OS, as I have downloaded and installed Windows from team-os before and never ever had a problem) Now when the Windows was finished with the download, I made a bootable USB with Rufus 3.11 - the specs was as follows: *Device: 8GB Sandisk Cruiser Blade USB stick *Boot Selection: Disk or ISO image * Image Option: Standard Windows Installation *Partition Scheme: GPT *Target System: UEFI (non CSM) *Format Options: File System: FAT-32.
Thereafter I intitialized the usb via the standard way of using the settings->recovery->restart->use device. System booted up and then a black EFI Shell screen came up, I did nothing inside this window, but after about a minute I rebooted via the button on my desktop (it never happened before so I had a fright) then the setup loaded and I selected my SSD drive as normal like i have always done. Setup finished and windows installed but I notices that my HDD was not there anymore (first time this happened) I tried to reinstall again but then the Recovery option dissappeared, it still installed but not correctly as there were options unavailable like to create recovery drive through the control panel was missing etc. I then used google to try fix the HDD and succeeded - I think i used the disk management utility that windows had. My HDD was showing again. Because the windows was making the errors I mentioned I then downloaded another Windows to try do a new install. I don't know if the settings were wrong on the usb I made again, but it did not work to install on my SSD - I selected format in the install window where you choose the disk to use, but then I got the error code of 0xE0000100 and after I searched for a fix I then tried to fix it with the command utility and diskpart.
It didnt work, and I rebooted the pc but got blue screens of death, with the given options esc for UEFI, F1 for recovery, F8 for startup settings, but only the Esc worked and because I do not have a monitor (I use a tv with standard resolutions 800x600 since my monitor broke and I can't afford another) I have very limited visibility in the UEFI, so did not mess around except for changing the boot select. To use usb. the error codes were : 0xC0000001, 0xC0000225, 0xC0000098, 0xC0000ba which after I searched i realised were boot errors. Boot manager problems but I don't know how to fix even though i have tried everything. I did what I could but I am still unable to get installation to work, if it does initiate then i get the install codes 0xC0000005 Verify installation source problem so I cant install windows.
I figured out that I can use recovery environment - I downloaded Gandalf PE but I think i should have gotten the Sergei one instead, created bootable usb and that is how i am writing now. I don't know where to even start to repair the disks or load drivers needed for windows installation success, please can anyone help me, I use the pc for work and it is my only form of income now because my husband can't yet return to his work due to my country still being in lockdown. Please if anyone can help me fix this I beg you.